Product Specifications

Pitcrew AIS Technical Specifications

Hardware, detection, deployment and integration details for the Pitcrew Autonomous Inspection System, for mining haul trucks and on-road heavy vehicles.

Specifications at a Glance

Parameter Value
ProductPitcrew AIS (Autonomous Inspection System)
ManufacturerPitcrew AI (Australia)
Sensor technologyFLIR thermal cameras, plus a high-resolution colour camera for truck identification
ProcessingEdge processing at the unit (vehicle detection, cropping and compression). Most inference and the thermographic and statistical assessment run in the cloud on AWS
PowerSolar with battery backup (OTR), fixed-site power (On-Road)
MountingTrailer-mounted or skid-mounted on a graded dirt pad (OTR), fixed installation (On-Road)
Vehicle fitment requiredNone
Compatible vehiclesAny standard six-wheel rigid dump truck, crewed or autonomous (OTR). Heavy vehicles over 4.5 tonnes GVM (On-Road)
Operating conditionsDeployed in ambient temperatures from -52 to above 50 degrees Celsius. Enclosures configured per region and site
ConnectivityStarlink as standard with cellular failover. Site Wi-Fi or Ethernet on request
Data integrationREST API, CSV export, configurable TARP alerting via dashboard

What is the Pitcrew Autonomous Inspection System?

Pitcrew AIS is an infrastructure-based thermal inspection station that autonomously scans haul truck tyres as vehicles drive past at normal operating speed. Nothing is fitted to the vehicle. FLIR thermal cameras and computer vision detect tread separations and other thermal anomalies that are often not visible to the eye and that pressure monitoring isn’t designed to detect.

The unit runs on solar power with battery backup. A customer dashboard provides scan review, configurable Trigger Action Response Plans (TARPs) and fleet-wide tyre condition trending. No permanent on-site operator is required. Routine maintenance is light: cleaning the camera windows and solar panels, plus general servicing of the unit.

Pitcrew AI manufactures the system in Australia.

What does Pitcrew AIS detect?

Pitcrew AIS detects tread separations and localised thermal anomalies on visible tyre surfaces. Normal Off-The-Road (OTR) tread surface temperature is 60 to 80 degrees Celsius, depending on ambient temperature, haul profile and payload. A developing separation can run 20 to 50 degrees Celsius or more above the surrounding tread, and the system works on that difference rather than an absolute temperature. For more on how the signature forms, see what causes tread separation and how thermal imaging detects tyre faults.

Detection lead time

Thermal anomalies from tread separation typically appear hours to days before internal pressure changes. On many sites, Pitcrew AIS is giving about nine days of additional lead time over traditional inspection for many damage types.

Sensitivity

Pitcrew AIS has approximately 95% sensitivity for tread separations producing a thermal signature above the detection threshold, based on validation against known defects and post-removal analysis on controlled datasets. Sensitivity varies with ambient conditions, vehicle speed and defect severity. Pitcrew AI does not claim 100% detection and recommends thermal inspection as one layer in a multi-method tyre management programme.

Limitations

Thermal detection needs a clear line of sight to the tyre, and the system cannot see the far sidewall. A light film of dirt does not necessarily block the thermal signature, but thick mud, snow or material on the tyre limits thermal visibility. Thermal inspection complements TPMS and pre-start checks rather than replacing them.

How does the inspection process work?

Trucks drive through the inspection zone at normal haul road speed, with no stopping, queuing or driver action. On each pass, one thermal camera covers the steer tyres (positions 1 and 2) and a second covers the four rear positions (3 to 6). A high-resolution colour camera reads the truck ID using optical character recognition.

A fanless industrial PC at the unit detects each vehicle, then crops and compresses the data. The data goes to the cloud, where most of the inference and the thermographic and statistical assessment runs on AWS. Results appear in the customer dashboard, and configurable TARPs route alerts by severity. Alert thresholds are set per site.

Multi-pass trending separates persistent thermal anomalies from transient readings caused by braking, sun exposure or recent tyre service. Every pass adds to a continuous thermal history for each tyre position across the fleet.

What are the hardware specifications?

OTR Mining AIS

Component Specification
Thermal cameras2x FLIR thermal cameras: one for the steer tyres (positions 1 and 2), one for the rear tyres (positions 3 to 6)
Colour cameraHigh-resolution colour camera, mainly for optical character recognition of truck IDs
Edge processingFanless industrial PC for vehicle detection, cropping and compression
Cloud platformAWS processing pipeline, customer dashboard
PowerSolar with battery backup
MountingTrailer-mounted or skid-mounted on a simple graded dirt pad. No concrete, bitumen or civil works
ConnectivityStarlink as standard with cellular failover. Site Wi-Fi or Ethernet on request. Edge recording and buffering covers backhaul outages
Operating conditionsDeployed in ambient temperatures from -52 to above 50 degrees Celsius
EnclosuresConfigured per region and site, with IP66-rated enclosures as a typical baseline
Vehicle fitmentNone. No sensors, tags or hardware on the vehicle

On-Road Heavy Vehicle AIS

Component Specification
Thermal camerasTypically 3x FLIR thermal cameras (1 in-road surface-mounted, 1 each side of lane)
Detection scopeBrakes, inner and outer tyre sidewalls, hubs, bearings
Detection methodThermal asymmetry detection across axle groups
MountingFixed installation at depot entry points
ConnectivityWired network or cellular
Cloud platformAWS processing pipeline, customer dashboard

Trailer units can be moved between haul roads, pit exits or dump approaches as priorities change. Both trailer and skid units deploy quickly on a graded dirt pad that a site grader can prepare.

What vehicles are supported?

The mining system works on any standard six-wheel rigid dump truck, crewed or autonomous, with no vehicle-specific calibration or fitment. Inspection covers visible tyre surfaces within the cameras’ line of sight. Autonomous trucks are inspected on every pass at normal operating speed, with no interruption to traffic management. See autonomous haulage. The On-Road system covers heavy vehicles over 4.5 tonnes GVM. See transport fleets and depots.

How does Pitcrew AIS compare to TPMS?

A Tyre Pressure Monitoring System (TPMS) is mainly a pressure device. It gives temperature-adjusted pressure readings so tyres can be filled to the right cavity pressure during servicing, and it is used as a safety tool to derate the truck when cavity temperature goes above spec from pushing TKPH. It isn’t designed to detect damage in the tread or outside the belt pack, such as heat separations. Pitcrew AIS covers that external thermal picture, so the two are complementary. For more detail, see why TPMS doesn’t detect tread separation.

Capability TPMS Pitcrew AIS
Measurement methodTemperature-adjusted pressure from sensors inside the tyreExternal surface temperature via FLIR thermal cameras
Vehicle fitmentSensors fitted inside each tyreNone
Detects pressure lossYesNo
Detects tread separationNot designed to detectYes (thermal signature)
Maintenance overheadSensor battery replacement, reinstallation at tyre changeNone on vehicle
AHS compatibilityRequires sensor management per tyre changeNo vehicle interaction required
Fleet coverageFitted tyres onlyVisible tyre surfaces on every vehicle, every pass

A mine running both TPMS and Pitcrew AIS covers pressure events as well as structural failures such as tread separation.

What deployment configurations are available?

Specification OTR Mining AIS On-Road Heavy Vehicle AIS
Primary locationHaul road roadsideDepot entry
Thermal cameras2x FLIR thermal cameras (steer and rear)Typically 3x FLIR thermal cameras (1 in-road, 1 each side)
MountingTrailer-mounted or skid-mounted on a graded dirt padFixed installation
PowerSolar with battery backupFixed-site mains power
Primary detectionsTread separations, thermal anomaliesBrakes, tyre sidewalls, hubs, bearings
Detection methodTemperature difference from surrounding treadThermal asymmetry across axle groups
Vehicle typesStandard six-wheel rigid dump trucks (crewed and AHS)Heavy vehicles over 4.5 tonnes GVM
Compliance outputMaintenance alerting via TARPsTimestamped inspection records supporting HVNL primary duty and CoR obligations

Timestamped inspection records help demonstrate how you meet your primary duty under the Heavy Vehicle National Law (HVNL) and wider Chain of Responsibility (CoR) obligations. See Chain of Responsibility compliance for heavy vehicles.

How does Pitcrew AIS integrate with existing systems?

Inspection results are accessible through the Pitcrew AI customer dashboard and via REST API for integration with fleet management and maintenance systems. Data can be exported in CSV format for offline analysis or import into existing CMMS platforms.

Configurable TARPs automate alert routing to nominated personnel via email and dashboard notifications. Alert thresholds, escalation rules and notification groups are managed through the dashboard interface. For sites requiring direct system integration, Pitcrew AI provides technical support for API connectivity during deployment.

What results have Pitcrew AIS deployments achieved?

At operational mining sites, Pitcrew AIS has identified tread separations confirmed on post-removal analysis that had not been detected by scheduled manual inspections or TPMS. Early detection of these failures has allowed planned tyre removals instead of unplanned roadside events, reducing both safety risk and the cost of secondary damage to rims and components.

Metric Value
Active systems globallyDozens across Australia, North America, South America, Africa and Asia
Tyre inspections (12 months to early 2026)More than 672,000
Operating regionsAustralia, North America, South America, Africa and Asia
Operating conditionsTropical, arid and cold climates, from -52 to above 50 degrees Celsius ambient. Sea level to 4,500 metres altitude.
Tier-one customersLeading global mining operators

Ready to evaluate Pitcrew AIS for your operation?

Request a demonstration or contact the Pitcrew AI team to discuss your site requirements.